Major constituent of brick is

Bond in brick masonry which is good in appearance

Nominal mix of M20

Half width full length

Standard size of brick

Nominal mix for M15

The thickness of plastering to masonry wall is usually

Major constituent of cement is

Soundness test of cement is done by

Pile foundation are suitable for

The window which is provided in flat roof of a room is known as

The area enclosed between the rails in a door is called

The proportion of lime cement plaster for DPC is

In the manufacture of brick the pug mill are used

The initial lead for earthwork is

The minimum thickness of stone masonry is

The shape of stress-strain curvefor concrete prescribed by IS456-1978 is

The true weight of a granular material is its

To perform the initial setting time test, the water is added to the cement at the rate of by weight of cement

As per IS specification the minimum time for initial setting of ordinary Portland cement

Soundness of cement is tested by

Cement becomes unsound in the presence of

In an average, how much percent water by weight of cement is required for complete hydration of Portland cement

For foundation of clayey soils the maximum differential settlement is limited to

In case of raft foundation on sand the maximum total settlement is generally limited to

Piles are usually not made of

One brick thickness of wall is roughly equal to

The movement of water under or around a structure on permeable foundation is

For one cubic metre 1 : 2 :4 concrete using 20 mm metal, the quantity of course aggregate required is

The slump recommended for concrete in Mass concrete :

In the manufacture of brick, the Pugg mill are used :

The under surface of a stair is called :

In chain surveying perpendiculars to chain lines are set out by :

The type of pile which is driven at an inclination to resist inclined force is known :

An ornamental projection from the phase of a wall is :

The type of truss used for spans varying from 5 to 8 m is :

The vertical member of a shutter of doors and windows is called :

A horizontal mortar joint on which masonry units are laid is called

The type of stone masonry adopted for the construction of residential building is :

The tiles are burnt in typical kiln is known as

The specific gravity of a good building atone should be :

Murumis an example of :

The measurement of colour in water is carried out by means of

The slope of water table near the well due to draw down of water from well is known as

The previous layer consist of sand and gravel supplying chinking water is known as

Glazing is used to make earthenware

Quick lime is a :

The first class bricks should have a minimum crushing strength of

The minimum thickness ror plastering for random rubble masonry :

The maximum particle size of fine aggregate is :