The material which controls the initial setting time of cement

The test used to detect the presence of uncombined lime in cement

Before testing setting time of cement, one should test for

The weight of rapid hardening cement is taken as

The initial and final setting time of quick setting cements is

The test used to determine the presence of uncombined lime in cement

Approximate weight of a brick should be

The equipment which is used for determining the standard consistency of cement is

A portion of brick obtained by cutting a brick length wise into two portion

The specific surface value of ordinary Portland cement should not be less than

The first artificial cement was manufactured in

In marine and harbour work the preferable cement is

The chemical formula of lime is

As per BIS, the maximum limit of water absorption of weight, for grade AA bricks is

The corner stone or brick in a masonry is called

Heating of lime stone to obtain quick lime is

Minimum thickness of brick masonry wall is

The overlapping distance recommended for Asbestos cement roofing, along the length of the sheet is

For determining initial setting time by Vicat apparatus, the weight of cement to be taken is

The initial setting time of Portland cement.is

The Nominal size of masonry brick is

The minimum thickness of walls built in cement mortar for a single storey buildingisA.

The mortar in which both cement and lime are used as binding material is known as

The nominal thickness of one brick wall is

The piece of brick cut with its one corner equivalent to half of its length and half the width of a full brick is known as

For plastering exposed brick walls, the cement sand mortar should be

The indentation marks made on the top of the bricks to provide key for holding the mortar is known as

The workability of cement is determined using the test

The stone masonry of finely dressed stones laid in cement or lime mortar is called

The ingredient added during the manufacturing process to control the setting time of cement is

The process of adding water to lime to convert into a hydrated lime is termed as

On metamorphosis lime stone becomes

The standard size of masonry bricks is

Alumina in brick earth gives the bricks

Which of the following is good for making brick

The ingredient added in the manufacturing process to control the setting time of cement is

Setting time of cement sample is tested by

A brick having full length and half width is called

The degree of grinding of cement is called

The solvent used in cement paints is

The mortar which both cement and lime are used as binding materials is called

The main constituent of Portland cement is:

Refractory brick are used for

The piece of a brick cut along the centre of width in such away that its length is equal to that of full brick, is called

Lime stabilization is very effective in treating

Soundness of Cement is measured by

The corner stone or brick in masonry is called

The bricks made with cavities are known as

Initial setting time of cement is

The function of iron oxide in brick is to