Brackets in the QWERTY key board can be found on the same keys as the numbers

Who was the first author to submit typewritten book manuscript ?

‘On I G S’ on the envelope of an official letter is found on :

1. Top right
2. Top left
3. Top centre
4. Bottom right

Address in official letters are typed in ____ spacing?

1. Triple
2. Double
3. Single
4. 1.5 space

In a demi official letter ‘To’ address is type on

Which of the following statement is/are correct?

1. “on IGS” should be typed at the top centre of the envelope.
2. “Registered Post” should be typed at the top centre of the envelope
3. Address of the sender should be typed at the bottom left side of the envelope

Demy official letters are concluded by

1. Yours faithfully
2. Yours sincerely
3. Yours truly

M/s is used in inside address as a title to

1. Company
2. Firms
3. Government department
4. Banks

Which among the following statements is/are not true ?

1. Demi official letters are written to get personal attention of the addressee
2. Generally demi official letter carries confidential or urgent matter
3. Demi official letter is concluded with 'yours faithfully '
4. Demi official is written and passed between officials

It is very essential that every official letter should have a complementary clause. Select the suitable complementary clause from the following options

1. Yours truly
2. Dear sir
3. Yours faithfully
4. Sir/madam

In an official letter 'stet' denotes

'By the order of the Governer ' is seen

'Dear sirs ' is used as salutation in

While typing a statement margins are set

In a business letter the recipients's address is typed on the -------

In official letter complimentary close generally used is

For typing the display matter ,--------line space should be used

In proceedings ,'To address ' is given in the

The punctuation mark used after 'from' and 'to' to be written while typing the address in a letter ?

1. No mark
2. Comma
3. Full stop
4. Quotation

In Government order below the abstract content usually leave -----space between two lines

1. Double line
2. Three line
3. One and half line
4. Single line

Confidential or urgent matters are forwarded as ?

1. Official letters
2. Notifications
3. Demi - official letter
4. Business letter

Parts of Duplicator are :

1. Silk cloth
2. Backing sheet lever
3. Wave roller

Feeding Tray is also called -------

-------is used to fix the silk /cloth sheet and to hold the typed stencil sheet

The part which is kept between the stencil sheet and backing sheet :

Method of substituting a new paragraph for the existing one is called ------

Precautions before stencil cutting are :

1. Ribbon position indicator should be kept in the stencil point
2. Types should be cleaned with petrol
3. Types as 'o' , 'e' ,'a' should be removed dust with hat pin

A duplicator is used :

If any part of the matter is not needed in stencil ,-------can be used

The ------- should be kept in 'off ' position while rotating drum for spreading ink

The papers which is suitable for taking carbon copies are

re. stands for

agri. stands for

Expansion of stn.

Thro. stands for

Full form of MOU

Expansion of EMD in tender notice

Expansion of ' w.e.f ' ?

div. stands for

Official abbreviation used for A.R and Authy

What is the full form of FCS ?

1. Fare copy superintendent
2. Fair copy superintendent
3. Fare copy superintendant
4. Fair copy superintendant

Which among the following part should not be oiled ?

1. Escapement wheel
2. Pinion wheel
3. Type segment
4. Ribbon gear

Jerky movement of the carriage is due to

1. Excess tension of main spring
2. Damage of dogs in the dog block
3. Damage of the tooth of escapement /pinion wheel
4. Accumulation of dirt on the carriage rack

Which brush is used to clean the type bar face ?

Due to over tension of main spring --------happened

Which among the following causes bad alignment while typing on a typewriter ?

1. Lack of uniform touch
2. Faulty depression of shift keys
3. Both 1 and 2
4. None of the above

If the dust clogged into the typefaces ,can be removed by ---------

Which among the following part should not be oiled ?

1. Escapement wheel
2. Pinion wheel
3. Type segment
4. Ribbon gear

Jerky movement of the carriage is due to

1. Excess tension of main spring
2. Damage of dogs in the dog block
3. Damage of the tooth of escapement /pinion wheel
4. Accumulation of dirt on the carriage rack

Reasons for sluggish movement of the carriage

1. Low tension of the mainspring
2. High tension of the mainspring
3. Worn out of teeth of escapement wheel