The method growing crops on ridges, running on the sides of water ditches, is known as:

The process of artificially supplying water to soil for raising crops is called:

Bandhara Irrigation is:

An RCC beam is subjected to following moments DL moment = 20kNm, LL moment=30kNm, seismic load moment= 10kNm. The design moment is:

Fillet weld is not used when angle between fusion face is

Workability of concrete effected mainly by:

Most common coagulant is:

The movement of water through the soil surface and into the soil is called:

Setting out of a simple curve by two theodolite method eliminates:

A lever is the ratio of:

In a simply supported beam the point where the maximum bending moment occurs is at:

Dashed lines are used to show:

The detention time for an ordinary plain sedimentation tank is:

The fall of moisture from the atmosphere to the earth surface in any form:

Revenue chain is divided into:

The turning effect produced by the force on a body which it acts is:

French curve is used for drawing:

Disposal of sewage causes formation of sludge banks in:

The diameter of commonly used round bar is:

Water curing satisfies the requirement of curing, namely:

Which one is the form of chlorine generally available?

A protected area of water where boats can move safely is:

Servicing and maintenance of aircrafts are carried out in:

The function of irrigation water is:

The point of application of total pressure on the surface of fluid is known as:

The survey in which the curvature of earth is taken into account is:

The proof resilience per unit volume is known as:

Over time allowance paid to the labour will increase the:

The RS joists are economical and they are suitable for:

The properties of concrete in its plastic stage is:

Which of the following disinfectants is used to kill the pathogenic bacteria?

A hard surfaced straight path used for the movement of aeroplanes for taking off and landing is:

The part in excess of hygroscopic water which exist in the pore:

Atmospheric air exerts a normal pressure upon all surfaces with which it is in contact is called:

The difference between two measured values of the same quantity is called:

Which of the following is useful to determine the toughness of a stone?

The internal resistance which the body offers to meet with the load or external force is called:

The movement of water through the soil surface and into the soil is called:

A lever is the ratio of:

Compatibility Torsion occurs in:

When a reinforced concrete structure is loaded, the bond resistance developed is due to:

Most common method of prestressing used for factory production is:

Which Is code gives details about wooden stairs?

Shrinkage deflection in RCC beam can be reduced by providing:

The energy which a body gains due to its position or configuration is called:

Newton law of viscosity relates:

.......... is the measure of loss of strength with remoulding, with water content unchange(d)

Loose soil has a relative density within a range of:

A cylindrical liquid container is subjected to constant rotation about its vertical axis. The free surface developed will be:

Coefficient of friction is: