Heavy loading of pollen grains inair may cause:

The stopping sight distance does not depend on:

When a body is subjected to transverse vibration the stress induced in the body will be

Instrument used for enlarging, reducing or redrawing the plans:

The need of drawing cross section from a contour map is to calculate:

A river training structure constructed to the river flow extend from bank to river.

In Engineering drawing, continuous thick lines are used to draw:

The meniscus correction in hydrometer reading is:

Use of coagulants such as alum:

In a singly reinforced concrete beam, if load is very small:

The ratio between centrifugal force and weight of the vehicle is called:

Surface tension is due to:

What is a freestone?

The water content at which plants can no longer extract sufficient water from the soil for its growth is called:

Polar co-ordinates are used mostly for drawing

The centre of gravity of semi circular lamina of a diameter D, lies from the diameter at a distance of:

The instrument having common disc for measuring both vertical and horizontal angle is:

Plastering is also called:

The flocculated substances are:

The type of irrigation in which water is available for irrigation throughout the year:

Stencil helps the draftsman to:

What property does steel impart to an R.C.C. structure:

What is added to rubber to make it a thermosetting polymer?

The most appropriate governing equations of ideal fluid flow are:

How shear strength be ensured in a beam?

A passage along the length of dam under its uptsream side is known as:

A critical hydraulic gradient may occur when:

Principle of moments states that:

The method of tacheometry is generally done by:

Number of fish bolts per fish plate is:

The chemical that is found to be most suitable as water evaporation inhibitor is:

The average value of coefficient of contraction for an orifice:

The minimum height of a flushing cistern for Indian closet:

The maximum area of compression reinforcement in a beam of cross section BxD is limited to:

If the gravitational acceleration at any place is one-half, the weight of a body will be:

As per principle, for testing the errors in instruments, the apparent error on reversal is...................................the actual error:

In a land measuring metric chain the ends of link is connected by:

Rabi crops are sown and harvested in the month of

A polar array creates new objects:

If a line is perpendicular to HP its plan is:

Presence of which material is not considered dangerous in drinking water:

If a beam fails in Bond, then its bond strength can be increased most economically by:

Obligatory points through which the alignment should not pass are:

Which of the following is considered as an equation of equilibrium.

The shape of bending moment diagram for cantilever with uniformly:

Which of the following is used for abrasion test:

Taste and odour in the water are caused due to presence of:

The environment exposure condition of concrete buried under aggression subsoil is classified as:

Which of the following is a first order lever

Select from the following, the device which is not suitable for setting out right angle