In sedimentation tank, the velocity of flow generally does not exceed:

Minimum grade of concrete for water tank:

Relation between gradient and camber:

The friction experienced by a body when it is in motion

The ratio of lateral strain to linear strain

If the velocity of a body decreases with time, it is called

The ratio of average load to the maximum demand of power during a given period is

The part of the building constructed below ground level is

The wooden queen post truss is suitable for span varying from

For RCC construction the maximum size of course aggregates is limited to

Minimum headroom provided for a stair is

A temporary structure constructed to support workmen, materials etc. is

Rankin's formula is used to find out:

An example of four-centered arch is

Sandstone is

The most commonly used modern instrument in surveying is

EDM stands for ........................

The projection of a traverse line on a line parallel to the meridian is known as ............................. of the line

The power of a telescope to form distinguishable image of objects separated by small angular distance is called its

An axis about which the telescope can be rotated in a Horizontal plane is called........................

A line joining the optical center of the object glass and the center of the eyepiece is called

The theodolite is an instrument used for measuring very accurately

The optical square used for setting out......................... angle

The obstacle, which obstructs vision but not chaining, is a

The fundamental principle of surveying is to work from the ................................

Orthographic projection is also known as...................................

A Line is parallel to both the HP and VP. Its projection is

In first angle projection method the plane is placed

When the section plane is inclined to the axis of the cone and cuts all the generators, the section obtained is

The dimensioning to be used only where the possible accumulation of tolerance does not endanger the functional requirements of the part

Single stroke lettering recommended by Bureau of Indian Standards for use in engineering drawings is

It is a curved ruler used for drawing irregular curve

Which instrument is used to erase a particular spot of a line without erasing the nearby line?

Letters and Numerals are designated by their .........................

CADD stands for

When a body offers resistance to deformation when acted by external load is called:

Concrete without reinforcement is called

A slab when supported on two sides or all four sides and if the length of the slab exceeds two times its width, is named as:

This is the common type of sloping roof which slope in two direction:

Red colour of the tile is mainly due to

The IS code recommended for trimmed drawing sheets is:

The correction due to curvature and refraction is ................... where D is the distance of observation in kilometer.

The upper plate of a leveling head of aa level is known as:

The lines joining the points of equal dip are:

If the length of a survey line is T and the reduced bearing is l, then latitude of the line is:

The type of light beam usually send out from a modern EDM instrument is:

From the following which is not an EDM instrument?

For creating 'an Arc' in AutoCAD, ........................ short cut key is used.

By the combination of setsquares, we can create ............................angle.

When a cone is cut off by a plane inclined to its base, but not passing through base, and the portion obtained after removing the part containing the apex is: