In a closed traverse of N sides the sum of interior angles is equal to:

Box sextant is used for the measurement of

A triangle may be defined as well conditioned when the triangle is:

One right angle =...........................

The preliminary inspection of the area to be surveyed is called:

An imaginary line joining the point of equal elevation on the surface of the earth is a:

A set of curves having centers in the same side is known as ........................curve

Fieldwork and plotting are done simultaneously in:

Other name of Discharging arch:

The kiln which may work throughout the year is:

The triangular portion between any two adjacent arches and the tangent to their crowns is:

It is more difficult to obtain good results while measuring horizontal distance by stepping

The distance between the centres of a adjacent rivets in the same row, is called:

Along the nuetral axis of a simply supported beam:

When equal and opposite forces applied to a body, tend to elongate it, the stress so produced is called:

Acceleration of a particle is:

The rate of change of position of a particle is called the:

An earthwork raised above the natural ground by the deposition of material to support construction at a higher level is known as

The portion of the roadway designed and constructed for vehicular traffic

Irrigation with sewage from a town is:

A subsidiary reservoir for storing excess water which is utilized during periods of supply:

A channel which is designed to irrigate all the year round is called:

The path followed by a fluid particle in motion is called:

Which one of the following is nota condition of equilibrium of a floating body?

When a small angular displacement is given to a body, floating in a liquid, it starts oscillating about some point. This point is called:

The phenomenon of rising water in the tube of smaller diameter is called

For a liquid, the variation in its volume, with the variation of pressure is known as:

The intensity of pressure at any point in a fluid, at rest, is the same in all directions is

Which one of the manometer is most sensitive?

A line in the first quadrant is parallel to HP and inclined to VP, its

When several forces act on a body, lies in the same plane is called:

When a particle moves along a straight line, the particle is said to have:

When it is not possible to set up the level midway between two points. The method of levelling to carry forward the levels on the other side of the obstruction is called:

The binding material used in Surkhi mortar:

A levelling instrument, consisting a telescope attached with level tube which can be tilted with in a few degrees in a vertical plane by a tilting screw is known as:

In the third order lever, the Mechanical Advantage is always:

A bolt is specified by its:

The rocks which are formed due to cooling of magma at a considerable depth from the earth's surface are called:

The minimum pitch of rivet holes of diameter of should not be less than:

Soil is considered as:

Talus is the soil transported by:

The diamond cone indentor is used in:

If the action neutral axis of a reinforced section is above the critical section then the section is:

Contour bunding is practiced in:

Limnology is the science which deals with:

Permissible error in chaining for measurement on a hilly ground is:

The extent of survey is more than.................. sq.km is taken to account of curvature effect of the earth surface:

Lower edge of the inclined roof surface is called:

In public buildings the maximum riser is limited to

When taking a back sight with a theodolite the screw which is tightened first is: