The usual range of percentage' is included in the presence of water, during concrete setting, over a period of

Length of 'Common Rafter' in a tiled roofing,when the size of root, is 1/3 span 'is

In the analyses of rates, the provision the provision included, as contractor's profit is:

The amount to be spent for the completion of unit quantity of a particular work, is

In steep grounds, to prevent the slipping down of soil, the method is

In areas where rainfall is very heavy, the suitable type of roofing is

Which of the following, is not an example for a continuous stair

The inner surface of a arch, is termed as

The innermost central portion or core of the tree is called

The widely used type of sand is

An example, for the chemical classification of rocks, is

A prop' in a beam, is used to make the point of application

The moment required to rotate the end ofa beam, while acting on it, through a unit angle, without translation of the far end is known as

The theorem of a three moments, is also known as

The deflection at the center of a fixed beam, carrying a central point load, when compared to simply supported beam,reduced by

The slope at both ends, of a fixed beam,will be

A fixed beam is also termed as

Mohr's theorems are used, to obtain the slope and deflection of beams, by

For a simply supported beam, with symmetric loading, the slope at the center is

For a cantilever with a UDL, for the entire span, the maximum deflection, at the free end is

The shearing stresses of a beam, at the neutral axis will be

The section modulus of a circular section,with diameter, 'd' is

In a loaded beam, the moment of resistance, resist the

In an overhanding beam, the point, where the maximum bending moment occurs, is

In a simply supported beam, the point,where the maximum bending moment occurs, is

The maximum bending moment at the fixed end of a cantilever beam, with a uniformly distributed load, for the entire span is

The pressure, exerted by the retained material, on the retaining wall is known as

The limit of eccentricity, of a circular section,of diameter 'd' is

Due to the torque, in a shaft, every cross -section of its, subjected to

The equivalent length of a column, with one end fixed, and the other end free is

A column is a

For an isotropic, homogeneous and elastic material obeying Hooke’s law, the number of independent elastic constants is

----- riveting is considered more effective in making the joint leak proof

A bolt is specified by its

For accurate production of an object, its drawing contain

A leader line is usually

In drawing, letters and numbers are designated by their

In a title block space should be provided for

Construction lines are drawn by

Continuous thick lines are used to draw

T. Square is used for drawing

Size of A2 drawing sheet is

If P, V and T represent the pressure volume and temperature of a perfect gas, then the constant of proportionality universal gas constant R =

Very high temperature is measured by using

Relation between current in ampere I, emf volt V and resistance R

The ratio of lateral strain to linear strain is

The Bending Moment at the free end of a cantilever beam carrying any type of load is

Velocity ratio of system of 'n' movable pullies is

If the mass of the a metal block of volume 500 cc is 5 kg., then its density is

1 mile / hr = ------ m/s