Why are 'Jews and Christians' mentioned in the last sentence? Choose the most appropriate of the options below:

Choose the option which is the antonym of the word "EGOISM".

The approximate cost of modern residential building construction per m² of plinth area is about

Celling height of residential building should not normally less than

The volume of 50 kg of cement bag is

Which one of the following estimates is prepared for technical sanction of the competent authority

The unit of measurement for D PC is

The multiplying factor taken for painting fully panelled door on both side is

For measurement of area of plastering work no deduction shall be made for the opening up to

For computing the quantity of earthwork using prismoidal formulae, the number of required sectional area be

For plastering with cement mortar 1:5, 12 mm thick one coat, the quantity of cement for 10 m²

The weight per meter of 12 mm Ø bar is

The imaginary line passing through the intersection of cross hairs and optical centre of the objectives is known as

Contours of different elevations may cross each other only in case of

The effect of curvature of the earth surface is taken in to account only if, the extent of survey is more than

The whole circle bearing of survey line is 130°, its reduced bearing is

If the angular measurement of a traverse are more precise than its linear measurements, balancing of the traverse, is done by

The survey in which the curvature of earth is ignored is called

If 'n' is the number of sides, then the total sum of exterior angles of a closed traverse should be .... right angles

The imaginary line joining the points of zero declination on the surface of the earth is

In a well-conditioned triangle, no angle should be less than

The process of turning telescope in vertical plane though 180° about the trunnion axisis called

A line is placed in the first quadrant in such a way that the line is inclined to HP and parallel to V P. the elevation will be lies in

A curve generated by a fixed point on the circumference of circle, which rolls without slipping along a fixed straight line is called

The path traced by the ball thrown up in air, reaches maximum height and travel a horizontal distance is

The eccentricity of the parabola will be

The exposed vertical surface perpendicular to the door frame is known as

The number of steps in a flight should not exceed ..... numbers

Apex line of a slopping roof is called

The external curve of the arch is known as:

The part of a circle bounded by an area and its chord is known as

The process of unfolding all the surface of an object on a plane is called

The computer language 'C' is an example for

'C' language has ..... number of keys words

A data structure used for storing a matrix is

The control structure in 'C' program used to stop the execution of a loop and transfer the control outside the loop:

The conditional structure used in 'C program to transfer the control to different statements based on the value of an expression

A simply supported beam of span l and flexural rigidity EL Carries a unit point load at its center. the strain energy in the beam due to bending is

A simply supported beam of span L carries a concreted load "W' at its mid span If the width 'b' of the beam is constant .and its depth is varying throughout the span, then what should be its mid span depth when design stress is σ

A circular shaft is subjected to a twisting moment 'T' and bending moment 'M the ratio of maximum bending stress to maximum shear stress is given by

Two closed thin vessels one cylindrical and other spherical with equal internal diameter and wall thickness are subjected to equal internal fluid pressure, The ratio of hoop stress in the cylinder to that in spherical vessel is

A beam fixed at the ends and subjected to lateral loads only, is statically indeterminate and the degree of indeterminacy

A continues beam has two equals span of length I each and is simply supported at the two ends. If it is loaded with a uniformly distributed load 'W' per metre length on both the spans, the spans the bending moment at the central support will be

Redundant frames have members

A fixed beam of span I carries a concentrated load 'w' at a distance 'a' from the left end and (a+b =1). the fixed end moment at A

The effect of sinking of support by is to create a bending moment equal to

A simply supported beam carries two equal concentrated loads 'W' at distances L/3 from either supports, the maximum bending moment 'M' is

The section modulus of a rectangular section is proportional to

A beam is said to be uniform strength, if

The stiffness of propped Cantilever is equal to