The levels to which the earth work will have to be carried out is known as:

The line lying through on a level surface & normal to the plumb line is:

Alidade is used for:

The least count of prismatic compass is:

XL is the short cut key of:

The seepage of water through body of dam is called:

...................... is a part of a circle bounded by an arc and its chord:

In which part of the crankshaft connects the big end of connecting rod:

Every materials obey the Hooke's law within its:

The argillaceous rocks have their principal constituents as:

The most economical steel section for a column is:

Specific Gravity is:

Property of material of returning to their original position after removing the external force:

The shearing stresses of a beam, at the neutral axis will be:

The geological classification of marble:

For a simply supported beam with a central load the bending moment is:

The property of a soil which permits flow of water through interconnected voids is called:

The distance from a point on one side of a gear tooth to a corresponding point on the opposite side of the same tooth, measured along the pitch circle:

Height of the tooth above the pitch circle is known as:

In a gear, the distance between two identical points on two adjacent gear teeth:

If the power is to be transmitted between two intersecting shafts, then:

If the power is to be transmitted between two parallel shafts,:

A rotating mechanical device, having a number of teeth on its periphery, basically used for power transfer is known as:

The performance of a belt drive is affected, when the frictional force between the pulley and belt is decreased, and the phenomena is known as:

In a belt drive:

An example of antifriction bearing:

In a milling machine

Quick return mechanism is used in which of the following machine tools:

The head stoke of lath is manufactured from:

In a shaper machine:

In a lathe machine:

Gudgeon pin is connected between:

In an IC engine, spark plug is used in:(

A water closet is commonly made of:

Creep is the:

A channel section consists of:

The coagulant used for water treatment is:

Chlorination of water is done for the removal of:

Lower edge of the inclined roof surface is called:

The entire Central Processing Unit (CPU) on a single chip is called:(

The most common input device used is the:

The member which support covering material of a sloping roof are:

In Ordinary Residential public building the D.P.C is provided at:

A portion of wall which the end of an arch rests is known as:

In Quadrantal system the bearing is measured from:

Usual concrete mix for RCC roof slab is:

Clinometer is used to measure:

Simpson's rule is used for:

The longest line in chain survey work is called:

Number of links per metre length of a metric chain: