The rise in the maximum flood level of the river after construction is known as.

The most accurate method for calculating the rainfall:

A weir, generally, used as a spillway of a dam is:

The curve obtained by the movement of the recording pen of the float type rain gauge is known as:

Process by which plant dissipates water from the surface of their leaves, stalks and trunks in the process of growth is called:

The ideal shape of a transition curve is:

Modulus of rigidity is defined by:

The centre of gravity of an equal angle section will be:

Discharge over a rectangular notch is given by

The velocity of flow at which the flow changes from laminar to turbulent is known as:

In fluids, steady flow occurs when:

The liquefaction of loose sand deposits may be caused by:

In box shear test, failure plane is the:

The coefficient of permeability is proportional the void ratio (e) as

The total vertical deformation at the surface resulting from the load is called

Clayey soils are best compacted by:

Optimum moisture content is the moisture content at maximum:

The technique of finding the fair price of an existing building or property is known as:(

For D.P.C at plinth level, the commonly adopted materials is:

If point sighted is about the horizontal axis, then the vertical axis is known as

Relation between Young's modulus and cube strength of concrete is:

Type of cross-drainage work where canal is passed below the drainage is.

The centre of gravity of a right circular hollow cone of diameter and height h lies at a vertical distance of from the base.

Subsidiary station established as near the true triangulation station as possible is known as:

The sun is at the Autumnal Equinox on:

Water flow in large sized pipes for large flow rates can be measured using:

The velocity distribution at any section of a pipe for steady laminar flow is:

Surface tension is caused by a force of ................... at the free surface.

A cantilever beam fixed at left end carries a udl w/unit length over the left half portion and a point load W at the free end. If L is thelength of the beam, the bending moment at fixed end is:

Minimum period before striking soffit formwork to slabs:

Group B buildings are:

The point where the bending moment changes its sign is:

The principle of working of an optical square is based upon:

The rounded projected part of the tread beyond the face of the riser is:

The levelling operation across a river is termed as:

The Gunter's chain is............... ft. long and its link length..............ft.

The purpose of canal lining is to:

The ratio of the length of the object in the drawing to the actual length of the object is called:

Hydrology deals with:

In surface method of irrigation water is applied directly from a:

Delta of a crop means:

A floor slab supported directly on column is called:

For concrete exposed to dry conditions, the minimum curing period is:

One mile ...........yard

A unit hydrograph of a basin is defined as a hydrograph of direct runoff resulting from rainfall excess of:

A current meter measure, the velocity of flow, if it is held:

Black cotton soils have:

Cam follower used in air craft engine is:

Thread found on neck of glassbottles are:

Petrol engine works on: