Meaning of OMR:

By applying the static equations i.e. 𝚺H= 0, 𝚺V= 0, , 𝚺M = 0, to determinate structure, we may determine:

The capacity of doing work by a skilled labour, is the form of quantity of work per day is known as:

The edge of sheets, slates or tiles projecting beyond the gable end of the sloped roof is:

The capacity of a strained body for doing work on the removal of the straining force is called:

The reduced bearing of a line is always less than:

Which of these provide the working space for maintenance and inspection of sewer?

The instrument used to determine area of the irregular figure or boundary is:

Latest finish time in CPM technique is indicated by a:

In Aquatic ecsoystems, carbon is stored in:

The true bearing of a line is calculated as:

The full form of SONAR is:

Method of laying the track over the prepared formation is known as:

Transition curves are provided on the approach to horizontal curve sin order to:

The design discharge for the separate sewer system is taken equal to:

The threshold markings are:

Glass is a mixture of:

A digital level reads a:

The function of an air vessel in a reciprocating pump is to:

Inorder to fit the transition curve, the main circular curve is moved inwards by a certain distance called:

Which of the following bricks types use the least amount of clay?

According to the principle of conservation of energy, under the action of force, the sum of PE and K.E of a particle remains constant

The non-clog pump which permits solid matter to pass out with the liquid sewage, is:

Which of the below is not a means of linear surveying methods?

Which of the following methods of structural analysis is a force method?

The minimum number of main steel bars provided in R.C.C.:

Darcy's law is valid as long as Reynold's number is equal to or less than.........................

Bitumen is soluble in:

The plastered area of a square pillar of side 40cm and height 3m is-------------------------------------

If the bearings of two lines AB and BC are S45°E & S45°E, the

Lacings are subjected to:

Insufficient washing of sand grains in a rapid sand filter causes:

A groove provided on the under-side of sill, cornice etc..

30 / 10 + 30 / 100 + 30 /1000 എത്ര?

The weight of hammer used in SPT test:

For the same cross sectional area which the following beams deflect more?

In a forced vortex flow, velocity v and radial distance Y related as:

$(2.5)^2-(1.5)^2$ എത്ര ?

The noise pollution (Regulation and Control) Rules was enacted in India in the year:

The projecting course at the upper part of a pier or abutment is..............................

Two shafts A and B have the same material. The shaft A is solid of diameter 100 mm. Shaft Bis Hollow with outer diameter 100 mm and inner diameter 50mm. The torque transmitted by the shaft B is..............................As that of shaft A

If the super elevation is 0.07 and width of pavement is 7m then the raise of outer edge with respect to inner edge is:

The type of irrigation in which the supply of irrigation water available is at such a level that it is conveyed on to the land by the gravity flow is:

Which one is made with the principle of helix?

In prismatic compass, the 360° or 0° of the graduation is marked at the .................... end of the graduated circle:

The maximum differential settlement in isolated footings on clayey soil should be limited to:

Which of the below doors is generally used in residential and office buildings?

+ = X, + + = -. - = + ആയാൽ (2 1/2 + 23)-(1 1/2 ÷ 23) + (4÷ 23) എത്ര ?

The centre of gravity of the volume of the liquid displaced is called.

If the groove is made parallel to the grain, then it is known as

Challenger App

No.1 PSC Learning App