The basic value of span to effective depth ratio for span upto 10 m for simply supported beam

The spacing of longitudinal bars measured along the periphery of the column shall not exceed

When the ratio of long span to short span is less than two, the slab is designed as

In the design of footing, to check shear for two way shear the critical section shall be taken a distance of

In the limit state of collapse, the maximum strain in the concrete at the outermost compression fiber is taken as

The permissible stress in axial tension on the net effective area of the steel section shall not exceed

The centre to centre distance of rivets of adjacent rows measured in the direction of stress is

The length of sides of the largest right angled in the cross section of the fillet weld is designated as the

The angle connect the web and the flange plates

It is assumed that the bending moment at any section of the plate girder is resisted by the

The maximum slenderness ratio for a member carrying compressive force due to dead load should not exceed :A.

Effective length of compression member when effectively held in position and restrain against rotation at both ends

ജനാധിപത്യത്തിന്റെ സൂര്യതേജസ് എന്നറിയപ്പെടുന്ന നിയമം?

വെള്ളായിയപ്പൻ കേന്ദ്രകഥാപാത്രമായി വരുന്ന ഒ.വി വിജയൻ രചിച്ച ചെറുകഥ ഏത്?

When all the forces acting on a body, lies in the same plane, they are called

The unit of acceleration

Two forces P= 3 N and Q = 4 N act on particle and their lines of action are inclined to each other at an angle of 90 degree. What is the third force R will keep the particle in equilibrium

The distance from an axis of reference where the mass or area of body is assumed to be concentrated is called

The ratio of the limiting friction to the normal reaction between the two bodies is known as

Property of materials of returning to their original position after removing the external force

Poisson's ratio

When a body is subjected to shear stress the modulus of rigidity is :

The ratio of ultimate stress to working stress is

The thermal strain of a bar of length L is heated at T0 C and having a coefficient of expansion and E Young's modulus

The maximum strain energy that can be stored in an elastic member without exceeding its elastic limit

The stress which is considered as the allowable stress for design purpose

A frame which is composed of the members just sufficient to keep the body in equilibrium, when loaded, without any change in its shape

Moment of inertia of a rectangular section having breadth b and depth d is

The stress induced in body in the case of a suddenly applied is ..............the stress induced, when the fame load is applied gradually

A straight line joining a station on a main survey line and another station on another line is called

The method of stepping is used for measuring horizontal distance in the case of

Fore and back bearings of a line whose end stations are free from local attraction,should differ by

Imaginary lines joining the points of equal declination on the surface of earth is called

The process of determining the location of the instrument station by drawing rays from the locations of known station is called

If RL of a BM is 100.00 M , back sight is 1.5 M and foresight is 2.5 M , RL of the forward station is

In the case of square method of contouring,the size of squares depends upon:

Face left and face right observations eliminate the error

The straight lines between two consecutive traverse stations are called

The latitude and departure of any station with respect to the preceding stations known as

The method employed when linear and angular measurements of the traverse are of equal accuracy

The leveling used to determine the difference of elevation between two points which are quite apart and when it is not possible to set up the leveling instrument midway between the points

The instrument used for reproducing,enlarging or reducing the map

If the values of elevation go on increasing towards the centre of a series of closed contour lines on the plan of the map indicate

A line joining the optical centre of the object glass to the centre of the eye pieceof a level is

The ratio of equivalent length of column to the minimum radius of of gyration is called

The ratio of equivalent length of column having one end fixed and other end hinged,to its length isA.1/2B.1/2C. 82D.

Which type of loading produces direct and bending stresses

If the maximum available frictional resistance is greater than the horizontal water pressure the dam should be safe against

The pressure exerted by the retained earth on the retaining wall is called

The maximum bending moment of a cantilever of length L carrying UDL W/m, in the entire length