When shear force at a point is zero, then bending moment at that point will be

Polar moment of inertia of a solid shaft of diameter D is

For 18 - 4 - 1 HSS, which one of the following is true

The ability of a material to be drawn into thin wires without breaking is called

The correct statement about gamma iron is.

The Centigrade equivalent of 100°F is

The law of which provides the basis of temperature measurement is

The maximum value of the frictional force,which comes into play, when body just begins to slide over the other, is termed as

The correct statement among the followingisA.

In a thin cylinder the ratio between circumferential stress to the longitudinal stress is

The resistance R of a conductor is inversely proportional to

The Indian Standard for presentation of gears on technical drawing is

The Orthographic projection recommended by BIS is

The T-Square with the working edge length of 1500 ± 10 mm, is designated as

Which one of the following is an enlarged scale

Which of the following is represented by a thick continuous line

Which one of the following is not an element of Dimensioning

Which one of the following is an abbreviation used in engineering drawing

What is the recommended minimum length of arrow heads in dimensioning

Which one of the following statements is true with respect to First Angle Projection

A straight line having unit length is placed parallel to the HP and is inclined to VP. The length of the front view of the line is

Pick the odd one out

According to IS: 919 the correct minimum size limit of the ISH8/f7 fit is:

H7/r6 indicates a

The roughness number N9 stands for a roughness value.

Which one of the following is not a conic

The conic for which the eccentricity ,e =1 is

Pick the odd one out:

With worn gear the possible speed reduction

The fastening pipe thread designated by size G 1/2 have a thread pitch of

The process which specifies what the right and left hands of the worker was doing is known

Which one of the following is a chemically treated reprographic method

In computer engineering ROM stands for

According to the method storage, which one of the following is not identical with the others

In Auto CAD the function of the key F8 is

In Auto Cad there are...........options to draw an arc

In Auto CAD which one of the following is a modifying command

In Auto CAD CHANGE is a command to

The standard stacks for broken stone unless otherwise specified, the length of stack shall be of

The size of a room is 5 m x 3 m, thickness of wall 20 cm and a slab projection of 30 cm from walls. If the thickness of slab is 100 mm,the quantity of cement concrete required for room slab

The coefficient of painting for fully glazed windows for both side

For taking quantity of wood work, the length of vertical frame of door having the size of 100 cm x 210 cm is

The initial lead and lift of earth work excavation in ordinary soil and depositing on bank is

The test conducted to determine the quantity of water to be added in cement to form standard paste

The permissible stress of M 20 concrete in compression in N/mm² is

The distance between the line of action of the resultant compression and the line of action of resultant tension is known as

The section in which the stresses in concrete and steel are simultaneously reach the allowable value, then the section is

The permissible tensile stress of High Yield Strength Deformed bar conforming to IS1139 in N/mm²

Compression in bars in a beam or slab when the compressive resistance of the concrete in taken into account, the modular ratio should be multiplied by

The minimum area of tension reinforcement shall not less than that given by the following