A line CD 141.4 mm long is tied 45° to vertical plane and parallel to horizontal plane. The front view of line CD measured as mm

A triangular plate ABC is in the first quadrant the end 'A' is 20 mm, end 'B' is 40 mm and end 'C' is 60 mm above the horizontal plane. The front view of the plate has the shape of.

Which of the following method is not used for drawing the development of spheres

The ratio between isometric length and true length

Visual ray method is used for drawing....... projection

The great advantage of oblique drawing over isometric drawing

The angle of a miter line is degrees

As per BIS, the three views commonly shown on an orthographic drawing are top, front and

Rocks formed from the magma are

Sewer pipes are made of.

Final setting time of ordinary Portland cement is

A good quality stone absorbs water not more than

The weight of one cubic meter cement is

A brick having full length and half width is called

The window that proiects outside of a room for admitting more light and air is

The horizontal platform in between two series of step is

A roof sloping in four direction is

The member which supports the roofing material of a tiled roof

The Voussoir at crown of an arch is known as

Planimeter is used for measuring

Unit of heat is

The tape made of an alloy of nickel and Steel is

Chlorination of water is done for the removal of

The brick forming corner of a masonry wall is known as

Cement concrete is strong in

Ashlar fine masonry is built from stones of

The horizontal course of masonry projecting from the face of wall at every floor or sill level is.

The masonry construction facing and backing of different material, such masonry is known as

Natural defects in timber are

The ingredients of gauged mortar other than water are

The bond consisting of alternate courses of headers and structures is called

The projecting part of the tread beyond the face of riser is known as

The triangular upper part of a wall formed at the end of wall pitched roof is

The structure constructed for cross irrigation water over a drain is called

The standard A2 trimmed size of drawing sheet in mm is

The crops which are ordinarily grown without irrigation water is called

180° is equal to

Plain scale is to read

The head room provided for stair case should be at least

The purpose of using queen closer in brick masonry wall is to

If 'n' is the number of sides of a closed traverse, the sum of exterior angle must be equal to

Prism square is used for

In a drawing the scale used in 1 cm= 2m.the R.F is

Stirrups are provided in beam reinforcement to take

The percentage of cement mortar required for R.R masonry is

The type of foundation consisting of a R.C.C slab covering the entire area in plan is

North light roof is usually adopted for the roof of

One mile is equal to

The slope of the line joining the crown and the edge of the road surface is called

The cement used to lay concrete under static water or running water is