If Quandrantal bearing of a place is N 10° W the corresponding whole circle bearing is

The magnetic bearing of a line is 48° 30' and the magnetic declination at that place is 2° 30' minutes East. The true bearing is

The sensitivity of bubble tube can be increased by

The curvature of earth's surface is taken into account, only if the extent of survey is more than

Survey that deals with mapping of large water bodies is known as

The true bearing of a line is calculated as

The error of closure for a traverse in terms of error in Latitude (ΣL) and error in Departure(ΣD) is

The perpendicular distance between intrados and extrados of an arch is called

The end stations of a line are free from local attraction. The difference between fore bearing and back bearing is

The method of measuring horizontal distance along the slope directly known as ---------- method

The correction of slope is given by ....Where 'h' is the difference in height and 'L' is the slopping distance

Each meter length of a metric chain is divided in to .... Links

For the measurement of short offset, Instrument is used

Sag correction is given by ....... Where L= length of tape, W = weight of tape and P = the pull

The principle of chain surveying is to divide the area in to

Walking over the area and observing its main features and boundaries is known as:

The angle between two plain mirrors of an optical square is

..... Instrument is used for setting out right angles

The length of a line measured with anerroneous chain .... where D and D' are true and erroneous distance and L and L' are true and erroneous length of the chain

The sum of the interior angles of a closed traverse is equal to right angles ------ ,where 'n' is the number of its sides

Fore bearing and back bearing of a line whose end station are free from local attraction should differ by

....... Meridian of a place changes its position with time

The zero of the graduation of prismatic compass is at ------ end of the graduated circle

The smaller angle which a line makes with a true meridian is called

An imaginary line joining the points of equal declination either positive or negative, on the surface of the earth is called ----- Line

At magnetic pole, dip of a magnetic needle is

The least count of a prismatic compass is

The reduced bearing of a line whose whole circle bearing is 80° is

Whole circle bearing of a line whose R.B is S20°W is

The angle between the true North and magnetic North at a place is known as

If true bearing of a line is 125° 30° and declination is 2° 30' W its magnetic bearing equals

If the fore bearing of a line is S 60° W, then its back bearing is

The dip of a magnetic needle at equator is

Magnitude of max. angle in quadratal system is

If the sign of magnetic declination is negative, then the declinations is

If the bearing of two lines AB and AC are N 40°10' E and N 89° 45'E respectively.Its Included angle is :

The bearing of a line in the direction of the progress survey, is called

The imaginary line joining the points having same dip on the surface of earth are known as

The convenient direction assumed as a median for measuring bearing of survey line known as

Face left and face right, observation eliminate ..... error

The theodolite whose telescope cannot be transited, it is called

Graduation of vertical circle of a theodolite is

The axis about which the theodolite may be rotated in horizontal plane is called

The axis about which the telescope along with the vertical circle of a theodolite,may be rotated in vertical plane is called.

The process of setting up a theodolite exactly over the ground station mark is known as

The vertical circle of the theodolite is in the left of the observer, then the observation is called

The meeting point of vertical axis, horizontal axis and line of sight of a theodolite is called

The adjustment required to made at every instrument station before making observation are called

When the vertical axis is truly vertical,the plate bubble must occupy ...... the position

When the line of sight is perpendicular to the horizontal axis, the vertical circle must read