A cylindrical pressure vessel 2000 mm internal diameter and 20 mm wall thickness has an internal pressure of 1 N/mm² then the hoop stress developed is

The total compressive force at the time of failure of a concrete beam section of breadth "b" without considering the partial safety factor of the material is

The characteristic strength of concrete is defined as that compressive strength below which not more than

Recommended value of the effective length of a steel compression member effectively held in position and restrained against rotation is

The effective length of a fillet weld is said to be

The ratio between the fully plastic moment and yield moment of a rectangular section in flexure is

A circular plate 100 mm. diameter is welded to another plate by means of 6 mm. size fillet weld. If the permissible shear stress in the weld is 100 N/mm^ then the greatest twisting moment that can be resisted by the weld is

The slenderness ratio of the lacing bars under compression should not exceed

For a propped cantilever of span "L" :subjected to a point load at mid span, the collapse load is

The shape factor of a diamond shaped cross-section is

In a tension member, lug angle connection is adopted when

The modulus of rupture of concrete gives

In a plate girder, the web plate is connected to the flange plates by fillet welding. The size of the weld is designed to resist

A soil sample is having a specific gravity of 2.60 and a void ratio of 0.78 The water content in percentage required to fully saturate the soil at that ratio is

A dry soil has a mass specific gravity of 1.35 If the specific gravity of solids is 2.7 then the void ratio is

A clay sample has a void ratio of 0.50 in dry state and specific gravity of solids 2.70 its shrinkage limit is

Sheep-foot rollers are mainly used for compacting

The moisture content of clayey soil is gradually decreased from a large value. What will be the correct sequence of the occurrence of the following limits : (1)Shrinkage limit. (2) Plastic limit. (3) Liquid limit. Select the correct answer using the codes given below

For a soil with void ratio equal to 0.7 and specific gravity of solids 2.7the head required to cause quick sand condition over a column of 5 meter high sand will be

Which one of the following set of values give the minimum clear cover (in mm) for the main reinforcement in the slab, beam, column and footing respectively according to IS 456—1978.

If a cantilever beam carries a uniformly varying load zero intensity at the free end and s/unit length at the fixed end then the shape of the BM diagram is a

A flow in which each liquid particle has a definite path, and the path of individual particles do not cross each other is called

When Reynold's number of a particular flow is greater than 2800 then the flow is called

The different in elevation of the top of bank and full supply level of a canal is called a

--------- is an impervious wall inside an earth dam to reduce the seepage

The height of an ordinary residential building is

The permissible compressive strength in M20 grade concrete in N/mm² is

The standard unit for RCC work is

The girth of the trees are to be measured at a height above the ground level

What is the initial lead and lift of earth work excavation in ordinary soil and depositing on bank

In calculating the area no deduction shall be made for the opening upto

For plastering with cement mortar 1:4, 12mm thick one coat, the cement required for10 m² is

The fresh detailed estimate of the additional work in addition to the original one is called

The number of standard bricks required for one cubic metre work is

The area of cross section of trapezoidal section is of formation width 'B', central depth 'd' and side slope S is

For computing the quantity of earth work using prismoidal formula the number of required sectional area will be

The road connecting district headquarters of a state is

The rate of rise or fall of a road along its alignments is termed as

The weight per metre of 10 mm diameter bar is

A line is placed in the first quadrant in such a way that the line is inclined to HP and parallel to VP. The elevation will be in

The path traced by the ball thrown up in air, reaches maximum height and travel a horizontal distance is

The eccentricity of the parabola will be

A curve generated by the point moving on the surface of a cylinder or on a cone in the circumferential direction at a constant angular velocity and in the axial direction at a uniform rate is

If the perimeter of a circular ground is 31.416m then the area of the ground will be

If the diagonal of a square is 25 m, then the circumference is equal to

The development of a tetrahedron will be a

The ratio of isometric length to true length is

A type of surveying in which the shape of the earth is taken into account

The total number of links provided in the Gunter's chain

The process of determining the difference of elevation of stations from vertical angles and known distance is known as