For a cantilever with a UDL, for the entire span, the maximum deflection, at the free end is

For a simply supported beam, with symmetric loading, the slope at the center is

Mohr's theorems are used, to obtain the slope and deflection of beams, by

A fixed beam is also termed as

The slope at both ends, of a fixed beam,will be

The deflection at the center of a fixed beam, carrying a central point load, when compared to simply supported beam,reduced by

The theorem of a three moments, is also known as

The moment required to rotate the end ofa beam, while acting on it, through a unit angle, without translation of the far end is known as

A prop' in a beam, is used to make the point of application

An example, for the chemical classification of rocks, is

Which of the following, is not a constituent of good brick earth

The manufacture of cement, burning process is carried out in a

The widely used type of sand is

The nominal mix of cement concrete,corresponding approximately to the grade m20 is

The innermost central portion or core of the tree is called

Which of the following is not a 'Base' for an oil paint

The example for a 'Deep Foundation' is

A covering of stone, placed on the exposed top of a wall, to prevent seepage of water,is termed as

The commonly adapted, nominal size of traditional brick

The inner surface of a arch, is termed as

Which of the following, is not an example for a continuous stair

In areas where rainfall is very heavy, the suitable type of roofing is

The vertical outside member of a door or window shutter is known as

In plastering of walls, using cement mortar,the suitable mix proportion of cement andsand is

Which of the following, is not an approximate estimate

The initial lead (or- normal lead) distance,in earthwork estimation is employed is

In steep grounds, to prevent the slipping down of soil, the method is

The out- turn of a mason/day, in 'Brickwork using cement motor in super structure, as per standards, should be

The quantity of cement required, for plastering 10 m² are, 12 mm thick, 1 coat using 1:4 mortar mix is

The weight of 1 m of Portland cement is

The amount to be spent for the completion of unit quantity of a particular work, is

In the analyses of rates, the provision the provision included, as contractor's profit is:

The unit of measurement, for 'pointing of stone masonry' work is

In painting of doors, the multiplying factor,for each side, of a 'paneled door is

The unit of measurement, for reinforced cement concrete, work is

When small items, are estimated, for which detailed quantities cannot be taken out,they are considered as

Length of 'Common Rafter' in a tiled roofing,when the size of root, is 1/3 span 'is

The usual range of percentage' is included in the presence of water, during concrete setting, over a period of

The hydration of cement takes place, in the presence of water, during concrete setting,over a period of

The permissible bending stress in concrete for M 20

The permissible tensile stress in steel for M.S bars is

In an under- reinforced section, of RCC beams, the depth of actual neutral axis is

In the reaction, M R= Q*b*d² for the beam design, the letter Q represents, the

In a RCC beam, the uniform distribution ofshear stress, with a maximum value of Tv =V/b*d is called

In cantilever beams, compression is developed at the

Curtailment of steel bars, in a beam, is possible, since

A two-way slab is generally provided when the length of the rooms

The size of the square mesh of steel bars, provided at the corners of a two way slab is

The permissible stress in direct compression,in concrete, as in the case of an R.C.C.column, for M 15 grade of concrete is

The equivalent length (effective length) of a column which is effectively held in position at both ends, but not retrained against rotation iS