The process which specifies what the right and left hands of the worker was doing is known

Which one of the following is a chemically treated reprographic method

In computer engineering ROM stands for

According to the method storage, which one of the following is not identical with the others

In Auto CAD the function of the key F8 is

In Auto Cad there are...........options to draw an arc

In Auto CAD which one of the following is a modifying command

In Auto CAD CHANGE is a command to

The standard stacks for broken stone unless otherwise specified, the length of stack shall be of

The size of a room is 5 m x 3 m, thickness of wall 20 cm and a slab projection of 30 cm from walls. If the thickness of slab is 100 mm,the quantity of cement concrete required for room slab

The coefficient of painting for fully glazed windows for both side

For taking quantity of wood work, the length of vertical frame of door having the size of 100 cm x 210 cm is

The initial lead and lift of earth work excavation in ordinary soil and depositing on bank is

The test conducted to determine the quantity of water to be added in cement to form standard paste

The permissible stress of M 20 concrete in compression in N/mm² is

The distance between the line of action of the resultant compression and the line of action of resultant tension is known as

The section in which the stresses in concrete and steel are simultaneously reach the allowable value, then the section is

The permissible tensile stress of High Yield Strength Deformed bar conforming to IS1139 in N/mm²

Compression in bars in a beam or slab when the compressive resistance of the concrete in taken into account, the modular ratio should be multiplied by

The minimum area of tension reinforcement shall not less than that given by the following

The basic value of span to effective depth ratio for span upto 10 m for simply supported beam

The spacing of longitudinal bars measured along the periphery of the column shall not exceed

When the ratio of long span to short span is less than two, the slab is designed as

In the design of footing, to check shear for two way shear the critical section shall be taken a distance of

In the limit state of collapse, the maximum strain in the concrete at the outermost compression fiber is taken as

The permissible stress in axial tension on the net effective area of the steel section shall not exceed

The centre to centre distance of rivets of adjacent rows measured in the direction of stress is

The length of sides of the largest right angled in the cross section of the fillet weld is designated as the

The angle connect the web and the flange plates

It is assumed that the bending moment at any section of the plate girder is resisted by the

The maximum slenderness ratio for a member carrying compressive force due to dead load should not exceed :A.

Effective length of compression member when effectively held in position and restrain against rotation at both ends

ജനാധിപത്യത്തിന്റെ സൂര്യതേജസ് എന്നറിയപ്പെടുന്ന നിയമം?

വെള്ളായിയപ്പൻ കേന്ദ്രകഥാപാത്രമായി വരുന്ന ഒ.വി വിജയൻ രചിച്ച ചെറുകഥ ഏത്?

When all the forces acting on a body, lies in the same plane, they are called

The unit of acceleration

Two forces P= 3 N and Q = 4 N act on particle and their lines of action are inclined to each other at an angle of 90 degree. What is the third force R will keep the particle in equilibrium

The distance from an axis of reference where the mass or area of body is assumed to be concentrated is called

The ratio of the limiting friction to the normal reaction between the two bodies is known as

Property of materials of returning to their original position after removing the external force

Poisson's ratio

When a body is subjected to shear stress the modulus of rigidity is :

The ratio of ultimate stress to working stress is

The thermal strain of a bar of length L is heated at T0 C and having a coefficient of expansion and E Young's modulus

The maximum strain energy that can be stored in an elastic member without exceeding its elastic limit

The stress which is considered as the allowable stress for design purpose

A frame which is composed of the members just sufficient to keep the body in equilibrium, when loaded, without any change in its shape

Moment of inertia of a rectangular section having breadth b and depth d is

The stress induced in body in the case of a suddenly applied is ..............the stress induced, when the fame load is applied gradually

A straight line joining a station on a main survey line and another station on another line is called