When equal and opposite forces applied to a body tends to elongate it, the stress so produced is called

The property by which a body returns to its original shape after removal of force is called

To obtain good bonding in brick masonry

A covering of concrete placed on top of an exposed external wall is called

The mortar in which both cement and lime are used as binding material is known as

The wedge shaped brick forming an arch ring is called

The chain surveying is well adopted for

A relatively fixed point of known elevation is called

Reactions at support of a structure can be determined if the algebraic sum of

A reinforced concrete beam is assumed to be made of

Along neutral axis of a simply supported beam

The distance between the centers of adjacent rivets in the same row is called

It is more difficult to obtain good results while measuring horizontal distance by stepping

The minimum thickness of walls built in cement mortar for a single storey buildingisA.

The whole circle bearing of a line observed by a prismatic compass is 110°. It is bearing read on a surveyor's compass, is

The first staff reading after the level has been moved to a new position, is

Which of the following is not true?

The Nominal size of masonry brick is

The initial setting time of Portland cement.is

Which one of the statement is not correct for a concrete

The type of bond is which every course contains both course contains both headers and strechers is called

Ornamental moulded course placed on the top of wall is

The concrete slump recommended for beams and slabs, is

The window that projects outside a room of a building for admitting more light and air is

If H is the depth of up stream water on a vertical dam and w specific weight of water, total pressure is

The measurement of discharge in pipes can be done using a

The point through which the resultant of the liquid pressure acting on a surface is knownas

The energy possessed by a liquid particle by virtue of its position is called

The average value of coefficient of contraction is

The velocity of flow of any section of a pipe or channel can be determined by using a

A channel which is designed for irrigate all the year round

Percentage of the area irrigated to the irrigable command is known as

The relation between the area irrigated and the quantity of water used is known as

A passage for the flow of surplus or waste water in a weir or conduit is known as

The movement of the water under or around a structure built on permeable foundation is

Quantity of cement required for one cubicmeter R.R.M. in 1:8 cement mortar

While estimating the area of wall plastering deduction is made for both sides openings, when the area of the opening is

Unit of measurement used for the payment of honey comb brickwork is

For determining initial setting time by Vicat apparatus, the weight of cement to be taken is

For one cubic meter finished concrete, the quantity of dry material required in their proportion is

The ratio between total area of all floors of a building to the plot area

In the case of a perpetual property the sum required to be invested to receive an annuity of Rs 1.00 at the specified rate of interest is known as

Which one of the following items are not included under Outgoings?

The capital cost of the building does not include

The term which is used to denote the gradual reduction in the useful life of the asset is

(Original cost-Scrap value) / Life in years, gives

A series of steps between two landings is called

The slope of the road pavement in the longitudinal direction is called

The Desirable sight distance is equal to

What is the length of transition curve, when velocity of vehicles V is 1000 kmph, radius of circular curve R is 450 m, and rate of change of centrifugal acceleration C is 0.45